8 Best Chainsaw For The Money 2023

Buying guides for the best chainsaw for the money

If you’re in the market for a chainsaw, you may be wondering which one is the best. There are a lot of different models and brands to choose from, so it can be tough to decide.

Best Chainsaw For The Money

In this blog post, we’ll take a look at some of the best chainsaws for the money on the market and give you our picks for the top three. We’ll also discuss what factors to consider when choosing a chainsaw and offer some tips for buying one. So if you’re ready to buy a chainsaw, read on!

Top 8 Best Chainsaw For The Money To Buy In 2023

*Note: Score is based on our AI score (Editor’s choice and rating)

What is a chainsaw?

A chainsaw is a mechanical saw which cuts with a set of teeth attached to a rotating chain that runs along a guide bar. It is used in activities such as tree felling, climbing, bucking, pruning, cutting firebreaks in wildland fire suppression, and harvesting firewood. Chainsaws with specially designed bar and chain combinations have been developed as tools for use in concrete cutting, stone cutting, and other materials.

How to use a chainsaw?

Step 1

Make sure your chainsaw is in good working order. Check the oil level and chain tension, as well as any other parts that might need attention.

Step 2

Choose the right size of chain for the job. A larger chain will make cutting easier but will require more fuel and time than a smaller one.

Step 3

Start by cutting off branches from the top down, then work your way down toward the base of the tree, making sure not to cut too far into its trunk or roots. If you do, your chainsaw can get stuck and break or jam up while you’re trying to pull it out! You should also trim any branches that are touching power lines or other hazards before starting!

Step 4

Use caution when working around rocks or other hard materials, because these can damage your blade and cause sparks that may start fires if they touch dry brush near them (which means they could also start fires along with it).

Step 5

Be aware of your surroundings at all times, and always have a clear escape route planned in case something goes wrong. Never cut above your head, and be very careful when cutting around other people.

Benefits of the chainsaw

Chainsaws are an excellent tool for cutting wood. They can be used to fell trees, clear brush, and cut firewood. There are many benefits to using a chainsaw, including:

-Reduced labor costs – It takes less time to cut down a tree with a chainsaw than it does by hand. This means that you will incur fewer labor expenses when using a chainsaw instead of hiring someone else to do the work for you.

-Increased productivity – If you have more trees on your property than you can reasonably cut down by hand, then it makes sense to invest in a chainsaw so that you can maximize your productivity by cutting down as many trees as possible in one day or over several days at most!

-Reduced carbon emissions – When you use a chainsaw instead of hiring someone else to do the work for you, there are fewer carbon emissions produced overall because there is less energy being consumed in order to accomplish what needs to be done!

-Ability to cut in difficult-to-reach places – If there are trees on your property that are in difficult-to-reach places, then a chainsaw is the perfect tool for the job because it allows you to get to those tough spots without having to worry about climbing or putting yourself in dangerous positions.

-Improved safety – When used properly, chainsaws can actually be quite safe. However, if you are not experienced in using one, it is important to hire someone who is so that they can ensure that the job is done safely and correctly.

The pros and cons of the chainsaw


  • -They’re fast. Chainsaws allow you to cut through large amounts of wood quickly and easily.
  • -They’re versatile. Chainsaws are used for making furniture, cutting branches off of trees, and even cutting logs into smaller pieces for easier transport or storage.
  • -They’re portable. Chainsaws can be taken anywhere you need them, and because they use fuel instead of electricity, you don’t have to worry about cords or charging batteries when you use them out in the field!


  • -Chainsaws can be dangerous if not handled properly (or if they aren’t used correctly). It’s important that you always use safety goggles and gloves when using a chainsaw so that no debris or splinters get thrown into your eyes or hands while working with this tool!
  • -Chainsaws are also quite loud, so if you’re using one in an area where noise pollution is a concern, you may want to consider wearing ear protection as well.
  • -Chainsaws can be expensive, especially if you opt for a higher-end model. However, there are plenty of affordable options available that will still get the job done without breaking the bank!

Common mistakes when using the chainsaw

Chainsaws are great tools, but they’re also dangerous. If you’re using a chainsaw for the first time, or if you are working with an unfamiliar model, there are a few mistakes you should avoid.

  1. Don’t use a chainsaw without safety equipment: Wear safety goggles or glasses to protect your eyes from flying debris and sawdust. Use earplugs to protect your ears from the sound of the engine and any nearby saws.
  2. Don’t use too much force: Chainsaws are designed to cut through wood; they are not designed to cut through metal or stone. If you try to cut into something that’s too hard, it will be more likely to kick back and hit you in the face.
  3. Keep your body in a safe position: Hold onto the saw with two hands—one on each handle—and keep your arms close in at your sides so that if there is a kickback, your arms will absorb some of the impacts rather than taking it straight on at full force (which could lead to broken bones). Stand squarely on both feet so that if there is another kickback, it won’t knock you off balance and make it harder for you to regain control over the saw.
  4. Don’t cut with the tip of the blade: The tip of the blade is designed for making precision cuts; it’s not designed for cutting through thick pieces of wood. If you try to use it for that, it will be more likely to kick you back and hit you in the face.
  5. Keep your hands off the trigger when you’re not using the saw: It may seem like a good idea to keep your finger on the trigger in case you need to quickly start the saw, but if you accidentally hit the trigger while you’re carrying the saw, it could cause serious injury.
  6. Don’t use a chainsaw in wet conditions: Wet wood is more likely to slip and cause the saw to kick back. Plus, the water can damage the saw’s engine.
  7. Don’t use a chainsaw when you’re tired: Fatigue can make it harder to control the saw and react quickly if there’s a kickback. If you’re feeling tired, take a break and come back when you’re rested.
  8. Don’t try to cut through knots: Knots are areas of wood where the grain has been twisted or bent, and they’re usually harder than the rest of the wood. Trying to cut through them can cause the saw to kick back.
  9. Don’t reach too far: When you’re cutting a piece of wood that’s longer than your arms, it’s tempting to lean over so that you can reach the end of it. But that puts your head and face in the line of fire if the saw kicks back. Instead, position the wood so that you can cut it without reaching, or ask someone to help you hold it.
  10. Don’t use a dull blade: A dull blade will cause the saw to work harder, which can lead to kickbacks. It also makes it more difficult to control the saw. If you notice that your blade is getting dull, stop and sharpen it before continuing.

Types of chainsaws

-Petrol-engine chainsaws: the most powerful type of chainsaw, petrol engine chainsaws are typically used for heavy-duty cutting jobs such as felling trees. They are also the most expensive and require regular maintenance.

-Electric chainsaws: electric chainsaws are lighter and quieter than petrol saws, making them ideal for use in residential areas. They are also cheaper to operate and maintain, but not as powerful as petrol models.

-Battery-powered chainsaws: battery-powered chainsaws offer the convenience of cordless operation, making them ideal for use in remote areas or for tasks that require a lot of maneuverability. However, they are not as powerful as either petrol or electric models and may need to be recharged more frequently.

Factors to consider before buying a chainsaw

Here are some factors to consider before buying a chainsaw:

Engine/Motor Size: The engine size of your chainsaw is a crucial factor to consider when purchasing a chainsaw. The engine is what will determine how much power the saw has, and therefore how well it can cut through wood. If you’re looking for a large amount of power, look for larger engines. However, if you’re looking for a more portable saw that is easy to carry around and use in more locations, then you may want to consider a smaller engine.

Portability/Location: Another important thing to consider is where and how often you’ll be using your new saw. If it’s going to be used in one location with no portability at all (e.g., your garage), then you can get away with buying something that isn’t as lightweight or compact as it would be for other locations or uses. However, if it’s going to be used in multiple locations (e.g., your yard or forest), then it’s probably best to go with something lighter and more compact so that you can take it from place to place without too much trouble!

Guide bar size: The guide bar size is another factor to think about when purchasing a chainsaw. The guide bar is the part of the saw that actually does the cutting, so a larger guide bar will be able to cut through thicker pieces of wood than a smaller one. If you know you’ll be cutting through thick pieces of wood regularly, then it’s worth getting a saw with a large guide bar; however, if you don’t anticipate needing to do that often, then you can save some money by going with a smaller guide bar size.

Price: Of course, price is always an important consideration when making any purchase! Luckily, there are chainsaws available at all different price points, so you should be able to find something that fits your budget. Just be sure to keep in mind the other factors on this list, as well—just because a chainsaw is cheap doesn’t mean it’s the best option for you if you need a saw with a lot of power or one that is very portable.

Warranty: Before making any purchase, it’s always important to check and see if the product comes with a warranty. This is especially true for big purchases like chainsaws, which can be quite expensive. If something goes wrong with your saw, having a warranty will ensure that you’re covered and can get it fixed without having to pay out of pocket.

Size: Size is another factor to consider when purchasing a chainsaw. If you have limited storage space or need something that is easy to transport, then you’ll want to choose a smaller size. However, if you don’t mind a larger saw and have the space to store it, then you can go with a bigger option.

Brand: There are many different chainsaw brands on the market, and each has its own pros and cons. Do some research to see which brands are most popular and why, and then decide which one is right for you based on your needs and preferences.

Design: Chainsaws come in all different designs, so you’ll want to think about what kind of design is best for you. For example, some chainsaws have a more traditional design, while others are more modern. Consider what kind of look you want for your saw and then choose accordingly.

Customer Service: If you’re planning on buying a chainsaw, it’s always important to consider the customer service of the company you’re buying from. If something goes wrong with your saw, you’ll want to be able to contact the company easily and get help with whatever issue you’re having. Be sure to read reviews of different companies before making your purchase so that you can be confident you’re choosing a reputable brand.

Material: The material of the chainsaw is also something to think about. Some are made from more durable materials than others, so if you know you’ll be using your saw frequently or for tough jobs, then it’s worth opting for a sturdier option. However, if you won’t be using it as often or for demanding tasks, then you can save some money by going with a less durable material.

Tips to use the chainsaw

Here are some tips on how to use a chainsaw safely:

-Use the right sized chain: Make sure you’re using the right size of chain for your saw. Using too large a chain will cause it to get stuck in the wood, while using too small of a chain may not cut through the wood at all.

-Know where your saw’s safety features are: Every chainsaw should have at least one safety feature that allows you to lock out the trigger so that it cannot be used until you unlock it again. This is important because if you accidentally cut yourself while operating a chainsaw, this feature will prevent serious injury or death from occurring by making sure no more cuts happen until you’re ready for them to happen.

-Be mindful of where your hands are at all times: Chainsaws are very powerful tools, and even when they aren’t running, they can still cause serious injury if mishandled or dropped on someone’s foot or hand by accident. Always keep your hands away from the blade edge when operating one because any contact with the blade will result in severe cuts.

-Wear the proper safety equipment: When using a chainsaw, always wear gloves, eye protection, and hearing protection to minimize the risk of injury. Also, make sure that you’re wearing sturdy shoes or boots so that you have a good grip on the ground and don’t slip while operating the saw.

-Cut with the grain of the wood: This may seem like common sense, but it’s easy to forget when you’re in the middle of cutting through a piece of wood. Always cut with the grain of the wood rather than against it; this will help prevent your chain from getting stuck in the wood and make The cuts smoother.

-Don’t force the saw: If your saw is having trouble cutting through a piece of wood, don’t force it. This can cause the chain to come off of the saw, which can be extremely dangerous. Instead, try turning the saw around and cutting from the other direction.

-Don’t use a chainsaw when you’re tired: Using a chainsaw is physically demanding work, and if you’re feeling exhausted, your reflexes will be slower and you’ll be more likely to make mistakes. If you start to feel tired, take a break and come back to it when you’re feeling more rested.

-Keep your saw clean: A chainsaw can get gummed up with sap or resin from the wood it’s cutting, which can make it harder to operate. Clean your saw after each use by wiping down the chain and bar with a rag soaked in mineral spirits.


What should you not do with a chainsaw?

Some things you should not do with a chainsaw include cutting through metal, using it as an ax, and cutting through concrete.

Additionally, you should never try to cut through tree roots with a chainsaw, as this can easily damage the saw. Always use caution when operating a chainsaw and be sure to read the manufacturer’s instructions carefully before using it.

Are chainsaws easy to maintain?

Chainsaws are actually quite easy to maintain, as long as you keep up with regular cleaning and sharpening. You’ll need to clean the saw after each use, and sharpen the chain about once a week (or more often if you’re using it frequently).

Beyond that, you’ll just need to make sure that the saw is oiled and that the air filter is clean. With proper care, your chainsaw should last for many years.

How long can chainsaws last?

There is no definitive answer to this question as it largely depends on how well the chainsaw is maintained and how often it is used. However, with proper care and regular maintenance, most chainsaws can last for several years without any major issues.

Of course, if a chainsaw is used heavily or for extended periods of time without being properly serviced, it will likely need to be replaced sooner.


The best chainsaw for the money is one that can handle a variety of tasks. If you’re looking for a chainsaw to take down trees, then you need something with more power and durability than if you were just looking for a saw to prune branches.

With all of the different makes and models on the market, it can be tough to determine which saw is right for your needs. That’s why we’ve put together this comprehensive guide to the best chainsaws on the market – so that you can make an informed decision before spending your hard-earned money.

Have you found the perfect chainsaw for your needs? Let us know in the comments below!

Related Post:

7 Best Table Saws Under $300

Leave a Comment